(SIKA ) 25KG SikaGrout®-215

Description

USES

SikaGrout®-215 is suitable for repairs to the following concrete structures:

▪ Machine foundations

▪ Columns in precast construction

▪ Concrete anchors

▪ Bridge bearings

▪ Cavities

▪ Gaps

▪ Recesses

▪ Rail beds

▪ Honeycombs (pre-packed grouting) SikaGrout®-215 is suitable for grouting works with clearances as low as 5 mm.

CHARACTERISTICS / ADVANTAGES

▪ Easy to mix and apply

▪ Good flow characteristics

▪ Rapid strength development

▪ High ultimate strengths

▪ Impact resistant

▪ Non-corrosive

▪ Non-toxic

▪ Chloride free

▪Dense and non-shrink (2-step expansion – Gaseous expansion in plastic stage & Crystalline expansion in hardened stage)

▪ Extended working time

▪ Good pumping properties

▪Tested for compatibility with drinking water, PSB report 57S030976-SLE-2

MIXING

Place about 70–80 % of the premeasured clean water (depending on consistency required – refer to “Mix Ratio”) into a clean container and gradually add the whole bag of SikaGrout®-215 into it while continuously mixing. Add the remaining water and continue mixing until the desired consistency is obtained. Mix for 2 to 3 minutes with a slow speed drill and paddle (~500 rpm).

For large quantities mixing, the use of a forced-action

mixer of rotating pan, paddle or trough type is preferred. Free fall mixers should not be used.